Laser cut project - Lamp

If you are passionate about wood and laser cutting, you have come to the right place.

By downloading the project files you will be able to replicate it at home.

By purchasing the project you will have access to the dxf files that you can import into your laser software. You will also find the lbrn - LightBurn - files ready to use. Simply connect your laser and start cutting.

Important note: when you download the project you will find over 20 files for each thickness from 3 to 5 mm ready.

This means that all you have to do is measure the thickness of your plywood and choose the relevant file. You will have a dedicated file for every 1/10 mm, i.e. 3.0 mm, 3.1 mm, 3.2 mm, 3.4 mm and so on by 1/10 mm up to 5.0 mm.

In this way you can choose the perfect file for your thickness. It is useful to know that when purchasing plywood, the stated thickness is a nominal thickness; the real value may be different. For this reason, a thickness gauge measurement is necessary.

In addition to full compatibility with any plywood thickness from 3.0 to 5.0 mm, you can choose from 3 lamp sizes - Large, Medium and Small -.

Should you encounter any problems or have any doubts, please do not hesitate to contact us using the email hfmakers2017@gmail.com.

Below is the (non-exhaustive) list of all files you will have access to by downloading the project.